The Caseta Wireless lighting system by Lutron is the most complete smart lighting system available. Today we are going to install it throughout the home to see …

source

44 thoughts on “Entire Home Smart Lighting Remodel”

  1. Very informative video. Could you please let us know what temperature lights been used in living room and hall way light's temperature? is it 4000k or 5000k? I liked the white brightness that is brining in.

  2. To everyone trying the cassetta wireless I would instead offer you the radio ra2 from Lutron, it has over 100 features the cassetta doesn’t have. The Ra2 can inter-grate your alarm, audio, a/c and more but the difference is the more brands and devices available than the cassetta, also the programming is complex to let you dimmer or switches do more than the average and the style of the dimmer from the Ra2 I find more presentable

  3. How to connect to multiple smart lights which are connected to one switch? I have 8 lights in living and kitchen area which are wire connected to only 1 switch. How do I connect (pair) all the smart lights to my app? Is there any work around it?

  4. Am really interested in learning more about smart home installation, back here in my country its a new innovation maybe .1% of homes in the entire country are smart, kindly furnish me if u ve a training program for smart home device installation. Thank you

  5. I have several of these switches but always wondered… can you just install one 3 way switch without the pico's? Say I didn't need to dim lights from all 3 locations but wanted them as part of my home automation and to be able to dim via voice or the one location. Could I just wire up the one Caseta 3 way switch and leave the other two standard rocker 3 way switches alone? I don't like batteries so the pico's have that drawback. I use them elsewhere in some cases.

  6. Hey Tech, I eviewed your video and during your 3-way demonstration I believe you meant the RED wire should connect to the Load wire and the Black to the Hot/Line wire. Otherwise the switch would not work as noted on page 16-17 of Lutron Advanced installation PDF file and noted below from page 17 diagram.

    Switch may be installed in either location.

    Note: The red wire must be connected to the load and the black wire must be connected to Line/Hot. The product will not work if the wires are reversed.

    Good Luck

    PM

  7. I noticed one of your room lights jumped to 100% before readjusting to the lower brightness setting. Do you know why they do this sometimes? I have a similar problem (Caseta dimmer, pico remote and 5 led recessed lights). I didn't want to replace all 5 lights with new ones if that wasn't going to fix the issue.

  8. great review/ demo… I'm sold. i've been installing wifi smart switches for simple things like outside lights, plugs for christmas lights.. etc.. i am an electrician and i have to say i don't think you should be showing people how to do electrical, you know just enough to be dangerous hahaha. thanks for the vid man

Leave a Reply

Your email address will not be published. Required fields are marked *